Repeater RIP 100 HE

Receiving data from RS232, RS485, RF 868 MHz.

Alphanumeric display to 5 characters / digits, height 100 mm, brightness automatically adjusted and suitable for external installation

Container in stainless steel and watertight logons.

Connects to all instruments of our production.

Configuration and customization protocol with PC softwaresup plied.

Click to enlarge image

Power supply	100 - 240 Vac 50/60 Hz
Max power consumption	25 VA
Operating temperature	-10 / +40°C (14 °F / 104°F) Humidity maximum 85% non-condensing
Storage temperature	-20 / +50°C (-4 / +122°F)
Display	Alphanumeric 5-digit dot matrix 5 x 7 high-efficiency red LEDs with a wide viewing angle
	Reading distance	Up to 115 feet
	Display brightness	Anti-reflection filter and automatic brightness adjustment in ambient light function. Suitable for direct light installation
Overall dimensions	500 x 185 x 115 mm / 19.7 x 7.3 x 4.5 in (l x h x p)
Mounting	A wall with 4 holes Ø 6.5 mm with external lateral distance 510 x 155 mm (width x height)
Case material	Stainless steel protected against dust
Protection level	IP 65
Connections	Waterproof circular connectors with conductor wiring with screw terminal
Communication ports	Rs232c / Rs485 standard
	Max. cable length	15m (Rs232c) and 1000m (Rs485)
	Serial protocols	ASCII + programmable custom protocols
	Baud rate	From 1200 to 115200 selectable
	Options	Ethernet protocol and Profibus protocol
Optional interface RF 433 MHz	Coupled operation with transmitter module to be combined with the transmitter weighing instrument
Num. RF Channels	Up to 7 channels selectable on the 868 MHz band for installation of multiple systems in the same area
Average radius of coverage	100 yards in the open air
Conforms to standards	EN61000-6-2, EN61000-6-3, EN61010-1

General precautions to be followed in the installation and assembly of load cells:

Follow the direction of application of force on the load cell
Do not exceed the limits of the temperature as indicated in the data sheet
Do not remove labels from the load cell
Adequately protect the cables with sleeves or channels
Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
Do not carry out any welding on the mechanical structure after mounting the load cell
Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
Protect load cell from any dust accumulation with any appropriate means